Skip to content
SengoMaroc

Oven repair

Electric, gas and built-in oven repair.

We handle heating element, fan, thermostat and control board faults, plus ignition on gas ovens. Built-in models need careful disassembly, which we're comfortable with.

Suitable for
HouseholdsShops
Chat on WhatsAppCall now
Oven repair by a Sengo technician
Oven repair
Same-day quote
2-year service warranty
From 200 MAD
Emergencies 7 days a week
Authorized on all brands — manufacturer warranty preserved — Qualified & certified technicians

Why it matters

A mis-calibrated oven means failed recipes, wasted energy (20% over-heating notably inflates your bill), and a real hazard on gas models. A small gas leak can turn into an accident. A worn door seal stresses the element and sensor. A 300 MAD intervention prevents thousands in replacement — or a domestic accident.

Equipment and systems we service

We work on every format commonly installed in Morocco.

  • Freestanding electric oven

    The most common home format, top/bottom elements with optional fan, 50-70 litre capacity.

  • Gas oven (LPG)

    Common in traditional kitchens, running on LPG bottle or town gas, main faults on ignition and safety thermocouple.

  • Built-in oven

    Fitted in a cabinet column, standardised 60 cm format, careful dismantling to preserve thermal insulation and cabinetry.

  • Multifunction fan-forced oven

    Interior fan for even heat distribution, ideal for baking and pastry, needs regular fan and filter cleaning.

  • Pyrolytic self-cleaning oven

    500°C self-clean cycle that carbonises residue, uses specific door seals that wear faster than a standard oven.

  • Combi microwave oven

    Combines microwave with conventional oven functions; frequent faults on magnetron, transformer and safety interlock.

Our intervention process

A simple, transparent flow — from first message to a fully working unit.

  1. 1
    Element and thermostat test

    Multimeter test of each heating element, thermostat test, and electrical-safety check before any dismantling begins.

  2. 2
    Ignition check (gas ovens)

    For gas ovens: spark check, safety thermocouple, gas valve, plus a foam-solution leak test.

  3. 3
    Replace faulty parts

    Most-replaced parts: top or bottom element, convection fan, thermostat, door seal, interior lamp.

  4. 4
    Temperature calibration

    After the repair we use an internal thermometer to confirm 180°C shown = 180°C actual in the cavity (a 15°C offset is common on older ovens).

  5. 5
    Door seal and safety test

    Confirm tight door closure (no thermal leaks), verify the safety lock on pyrolytic models, and check the interior light.

Signs you need this service

If you notice any of these symptoms, get in touch fast — waiting typically makes the repair more expensive.

  • Oven doesn't heat, or heats abnormally slowly
  • Actual temperature is far off the setting
  • Grill element no longer works
  • Interior fan doesn't spin
  • Door no longer seals (heat leak)
  • Gas smell when starting (gas oven — urgent)
  • Intermittent ignition or no ignition
  • Sparks or smoke inside the oven

Supported brands

Available in

Frequently asked questions about this service

Any other question? Send us a message on WhatsApp.

My oven won't heat — is it the element?
The element is the top cause (60% of cases) but not the only one. Thermostat, temperature sensor or control board can also be at fault. A 5-minute multimeter test tells us which.
I smell gas when I light the oven — what do I do?
Turn off the oven immediately, open windows, shut the LPG bottle or main gas valve, and don't operate any electrical appliance. Call our 7j/7 emergency line right away — don't try to fix it yourself.
How long to repair a built-in oven?
Diagnosis takes 20-30 minutes. A simple repair (element, fan, seal) 1-2 hours. Full removal from the cabinet: budget 3 hours. Most cases done in a single visit.
The grill element is dead — is repair worth it?
Yes — replacing the grill element costs 300-600 MAD with warranty, far cheaper than a new oven. We stock the part for most brands.
How do I run pyrolytic cleaning safely?
Empty the oven completely (racks, dishes, foil), open kitchen windows for ventilation, and don't open the door during the cycle (auto-locked until under 300°C). After, wipe the ash with a damp sponge.
My oven's temperature is off — can it be calibrated?
Yes — we use an internal thermometer to measure the actual offset, then calibrate the thermostat or replace the sensor if the offset exceeds 20°C. Quick same-visit fix.
When should I replace the oven door seal?
When the seal looks cracked, hardened, or missing in spots. Quick test: slide a sheet of paper between door and oven, close — if it pulls out easily, the seal is dead. Replacement 200-450 MAD.
Fast response

Have a technical issue? Let's talk now.

A technician can respond immediately on WhatsApp.

Chat on WhatsAppCall now
Sengo Maroc

Professional refrigeration, air-conditioning and appliance services across Morocco

Ouarzazate, MoroccoMonday to Saturday — 08:00 to 20:00Fast response 7 days a week for emergencies
Chat on WhatsAppCall now
WhatsAppCall